Zedi Go

When customers are in the field or simply away from a computer, they can easily access their current production and operational data, instantly update systems, and directly control their field devices through Zedi Go. The Zedi Go mobile app enables users to view all data, trends, and alarms from any Zedi monitored device.

In addition, users can change orifice plate settings and remotely control SCADA devices with demand polls and ESD commands. Zedi TrueChart customers can enter daily chart estimates and have them accessible in Zedi Access.

Display/Walk-Through

Login Screen

The login for the Zedi Go App is the same username and password as Zedi Access. Here you will find:

1. Enter in Username and Password.
2. Select Forgot username or password if needed.
3. Select Log in.
4. Zedi users with Account Gateway credentials, select Login with Account Gateway.

Selecting Locations

To view locations, select the hamburger menu in the top left corner of the app.

1. Select Add Location(s). Select the + to add location.

       a. Name, UWI, Serial Number, IP Address, or Zedi Id.

       b. Select Show All.

2. Select Routes/Runs. These will need to be created in Zedi Access.

3. Select Edit Route/Run to modify.

4. Location can now be selected on the home page. Locations can be viewed on the map at the bottom of the page.

Summary icon

The summary icon is a quick view of three key EFM Measurements – Gas Flow Rate, Static Pressure and Yesterday’s Volume.

1. Select the summary icon on the top of the screen.

Acknowledge Alarms

User can acknowledge and clear alarms that have been triggered on the selected sites.

1. Select the alarm icon on the top of the screen.

2. Here the user can see all alarms for the sites and can acknowledge and clear alarms.

Demand Poll (SCADA devices only)

Users can select any SCADA location to bring up location details. Start a Demand Poll to receive up-to-the-minute information within seconds.

Emergency Shut Down Feature (SCADA devices only)

Control shutdowns, if necessary, right from your mobile device

NOTE: This feature will only appear for locations with a special sensor type (ESD set).

Well Test

Add and manage Well Sites on Zedi Go. Update BS&W manually and accept or reject easily.

1. User can graph sensors using selected timeline.
2. User can comment and select or reject test.

Orifice Plate Change

Update orifice plate changes right from your mobile device while still in the field.

Graphing

Should you need to view more data, the user can select an individual sensor to view graphical data for the past 24 hours.

1. To view historical data, select a date range from the top tool bar.
2. Use your fingers to expand the graph.

Viewing & Entering Site Notes

Users can enter or view comments about equipment or site performance and conditions - improving communications between the field and office. Because Site Notes integrate directly with Zedi Access, they can be viewed and entered on either platform.

1. To access the Site Notes function, select the pen & paper icon on the top tool bar.

Feedback

We want to hear from YOU! In the menu, there is a “Feedback” option that sends your inquiries to the Zedi Forum in Zedi Access. Please send us your thoughts, comments, and suggestions on our app!