Adding/Removing Sensors to the Site Display

During the commissioning process, the sensors will be added to the Site Display in the upper or lower panel. Admin users can add additional sensors to the Site Display or remove a sensor from being viewed. 

Please note: If the company would like to add any sensor to the upper panel, this will need to be done by the Zedi team.

To Add Sensor:

1. In the Site Display, select the Pull-down Menu and Configure Location.

2. Find the sensor you would like to add. Under the Display column, toggle Yes to display or No to remove.

3. Now the Sensor will show in the Site Display if Yes was selected or will be removed if No was selected.